About The Authors

Tuesday, March 18, 2014

Automotive History II: Deciding on Layout

An article in the Economist on "tuk-tuks" - three-wheel vehicles common in a number of countries. In the rural Philippines car ownership is still only for the well-off, and taxis ... well, if you're well-off enough to afford a taxi, you can afford a car or get a ride from someone who does have one. On the other hand, tricycles are everywhere, a motorcycle with two seats beneath an awning in the back, spewing exhaust and drowning conversations, while guaranteeing that the clouds of dust never settle.

With hindsight we know why people want 4-wheelers, among other things stability at high speeds, but the idea of an inexpensive 3-wheeler persists. On the motorcycle end there's the 3-wheel "Can-Am" BRP Spyder, and the now-defunct Aptera Motors plan for a mass-market 3-wheel car. Now I've never seen an actual Aptera, though the Henry Ford [Museum] in Dearborn long had a rear-wheel drive 3-wheel vehicle from [pardon my memory] 1903 on display.

...not all niche configurations disappear...

Standard histories will note the shift from engines under the driver to the front-engine, rear-drive layout (nodding to the 1891 Systeme Panhard). But in the early post-WWII era 3-wheelers were also prominent in Japan; as late as 1960, they comprised the majority of vehicles made (and in Japan trucks dominated until 1968). Thereafter output fell, and then plummeted, but in 1963 roughly 1 million were in use. Several of today's manufacturers got their start making such vehicles, particularly Toyo Kogyo (today's Mazda), Daihatsu, and the Mizushima plant of what is now Mitsubishi Motors. Now Mitsubishi exited in 1962, shifting output to (small) 4-wheel trucks; Daihatsu made such vehicles until 1972, and Mazda until 1974.

Stability was an issue, and that became important as roads became better so that speeds rose and maneuverability less critical. (In Japan's case, licensing exemptions helped, lasting until 1965, but the industry was already dying.) Four wheels helped too as vehicles themselves became larger. But 3-wheelers persist, in forklifts and tractors. Though most have two wheels in front, they are close together to allow a short turning radius.

Ironically, at higher speeds modern electronic stability systems offset the tendency of trikes to turn over, braking selectively, and paring back the throttle. That however is for operations on standard roads. At lower speeds and off roads, stability remains problematic: farming is the most dangerous occupation in the US that employees large numbers, and one source of danger is overturning equipment. So 3-wheelers persist more widely than people realize, and their potential remains. Outside of commercial applications, however, there's no evidence that they will ever be more than recreational products: at first opportunity, most people move from smaller to larger cars, and the cost differential of using only 3 wheels surely can't offset that preference.

The larger story remains that the variety of potential vehicle configurations is large, and most have been produced at one or another time. Some persist in niches – 3 wheelers, rear- and mid-engine vehicles. Not all niche configurations disappear: today front-wheel drive accounts for most vehicles around the world.

2 comments:

  1. Having spent a bit of time driving farm tractors, the stability issues with them are quite different than for 3-wheeled road vehicles. The stability issue with a farm tractor is not that it will fall over on its side in a turn, but that the engine develops enough torque to lift the front of the tractor off the ground and flip the tractor on an axis perpendicular to its direction of travel. Of course, going uphill, this situation is exacerbated. If the tractor is pulling an implement behind it, there is a margin of safety as the implement will stop the tractor from flipping over.

    Of course, this problem could be addressed by electronics which would simply chop the power once the tractor lifts up above a certain vertical angle, say 45 degrees.

    ReplyDelete
    Replies
    1. Thanks – the last time I was around a tractor was catching bales on a wagon about 20 years ago, and what I remembered most was that it was a Missouri day well over 90ºF. I never really got to drive one. I suspect the same problem is there for backhoes / payloaders / forklifts, someone at the dairy up the road from me managed to flip a payloader into the manure pit ... and got out alive.

      Delete